Sounds good, what magnaflows? Here is mine with a 3 1/2 X and 3 1/2 Bullets, I had to cut the X cause the headers that were in this car were Hooker super comps, and they were narrower than my Hustler's with those adapters, anyway after trying to figure out where to cut it and how much to weld back in etc so i could get it as close to the rear of the trans as possible, cause that's How it will be in spring. I ended up with a 1/4 gap at the top of the drivers collector ,cause the bullets were hitting the bottom of the floor by tunnel, this was just to hear how it sounded it with them, I will change it or just get a New X I haven't decided yet, But it sounds good! When I revved it the smoke is from dumping trans fluid down my carb from before to store it, and the mic kinda gets muffled when it is revved up too. This was just a test tho as its 50 here today !! Turn up the volume!

. It's put away now til spring
__________________
Darby
74 Grandville 2Dr 455 c.i 4550#
2011 1.60 60 ft,
[email protected]@117.74
2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft,
[email protected] [email protected]
M/T 275/60 ET SS Drag Radial
2024(Pontiac 505) 1.25 60 ft,
[email protected],
[email protected].... 275/60 Radial Pro's