This is the House Brand of Rage Extreme. Sells for about $35
Cornering lights are hard to find and/or very expensive. A set just sold for $415 + Shipping on Ebay. I stumbled across these Buick parts that appear similar to the Pontiac cornering lights. I hope they work out. If not I can probably sell them for what I paid for them.
I started working on the passenger door today.
The back bottom corner is pushed in about 1/16" but is even with the quarter a couple of inches up.
Rather than fill this, this is something that can be tweaked. I used a Crescent wrench to carefully bent the edge back into place.
Success, no additional work needed here.
The area around the door handle will need more work. I believe this is due to the dynacorn quarter not being quite right. The edge goes from even to about 1/16" too high.
This is the first filling attempt. On this work I am using Rage rather than Rage extreme. Rage extreme tends to run on vertical surfaces when applied thickly. I will probably need another application on Rage and then follow it up with Rage Extreme.
The front door edge has similar problems and also requires filler. This is the first application. Several more will probably be required.
