Quote:
Originally Posted by Wade Congdon
This is exactly correct. A straight reamer is the way to do this. (Carbide if possible) Best way is in a lathe with the reamer in the tailstock. If you know someone at a machine shop this would be a 5 minute deal for them.
|
Wade,
I do know someone at a shop, so just use a straight .500 one then? Or go smaller first?
__________________
Darby
74 Grandville 2Dr 455 c.i 4550#
2011 1.60 60 ft,
[email protected]@117.74
2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft,
[email protected] [email protected]
M/T 275/60 ET SS Drag Radial
2024(Pontiac 505) 1.25 60 ft,
[email protected],
[email protected].... 275/60 Radial Pro's