Thread: Mondello Tiger Head CNC Upgrade
View Single Post
  #7  
Old 12-22-2011, 10:53 PM
Jim Robertson's Avatar
Jim Robertson Jim Robertson is offline
Ultimate Warrior
  
Join Date: Jan 2005
Location: Abilene Texas
Posts: 1,346
Default
Calvin,
Nice shaping...those should work out great. If you raised the floor did you weld it up or? What is the cross section area at the pushrod on your port? What is the actual flow volume (cfm) at .700 lift on your intake port?
Thanks

Reply With QuoteReply With Quote