Back in 1999 I purchased low compression pistons from Kanter's for my 1961 4 cylinder motor. Turns out they were the 10.25 to 1 pistons. http://www.kanter.com///productdetai...Cat=32&Prc=362
Make sure they are the low compression ones.
Don
__________________
1966 GTO
1966 421-10.1-1 comp-Race Tec 23cc Pistons
KRE Tri-Power
KRE 65cc Aluminum Heads
XE274 cam by Comp Cams
DUR 230 Int 236 Exh @.050 - 110 LSA
LIFT .491" Int .491" Exh
Tri-Y-Headers by Tribal Tubes w/ Goerlich Mufflers
1966 Muncie Wide Ratio 4-Speed
1968-72 Chevy 12 Bolt Rear End w/ 3.73 rear gears
Last edited by SD421; 01-01-2012 at 07:05 PM.
Reason: grammar
|