Quote:
Originally Posted by john marcella
This is one of my 4 into 1 water manifolds. It's set up for 4 #10 o-ring fittings (but you can use a combination fitting that is up to #12) and 1 #20 o-ring on the opposing side.
I also make a 2 into 1 water manifold. It uses 2 #16 to 1 #20.
Both have provisions for NPT for water temp pick up.
 |
Interesting...is this something you make?..sell?
Could be used to pipe water from both ends of heads.. 
__________________
ECM member.
2008 Outlaw Pontiac Drag Series Champion
MANDRA
Do it now fool! Life is short.
69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'.
Going back to track with pump gas engine....
My 60 Ventura retired to street/strip duty..
|