[Zoojelly]

I am painting when weather is good and started seats when wet; The first seat bottom took 3 hours but I have a technique down, Stretch exactly where you want it, poke a hole where hog ring goes insert hog rings all along edge and clinch down a portion at a time.
I added lower control arm braces and replaced bushings, KYB shocks,new coil springs and insulators and lower sway bar.regretfully had to farm out pressing in control arm bushings for $20.
I am starting rebuild of pinion and wheel bearings and installing new brake lines and rear drum brake hardware.
step 6 floor panels
step 7 repair frame
step 8 rebuild rear suspension
step 9 paint body interior, firewall and trunk
step 10 brakes
After brakes is paint body exterior and sit body on frame!