Quote:
Originally Posted by johnta1
What's the HP and the price for it on the 632 BBC?
(like a Sonny or whoever it is)
 |
You have internet. Look it up. Then look at the durability built in.
But here a killer deal. And it's a little motor!!!!!!!!!!!!
COMPLETE from carb to pan. crank trigger, vacuum pump, etc. just add headers and go.
615 CU. IN. 14.5 PONTIAC 1X4 PRO STREET PUMP GAS ENGINE (1000hp)
DESIGNED TO OPERATE ON 92 OCTANE PUMP GAS *** Cross Country Endurance Application 925 HP @ 6500 RPM
1000 HP On Pump Gas!!
Complete and Dyno Tested
PRICE $31,200.00
Features:
Dart Big-M block with ARP studs
4340 internally balanced crank
Eagle steel rods w/L-19 bolts
SAR Venolia pistons with tool steel wrist pins
Total Seal rings
Clevite 77 bearings
SAR/Brodix "Pro Stock" 14.5 degree aluminum head
T&D shaft mounted rocker system
Crane billet roller timing set
SAR/Crane hydraulic roller camshaft
Isky hydraulic roller lifters
Manton 7/16" pushrods
ATI balancer
Internal Moroso Billet pump w/ Moroso aluminum oil pan
MSD cranktrigger distributor
Moroso wires
Holley 1150 carb
Sonny's aluminum valve covers
MSD platinum starter
Moroso vacuum system
Manley valves