Quote:
Originally Posted by jdw_poncho
I built my front and mid plate mounts with the stock block and everything fit when I bolted in my IA2. I didnt have my trans at the time so I built 6C after everything else was put in.
Something you might ask about, will the 6 bars be angled up to the rocker bar to clear your exhuast? If you havent already figured that out I would strongly suggest getting a mock up block and route your exhuast before he welds your inner 2A-B and 6 bars.
Since Im running the car on the street I still have to figure out exhaust placement. I dont think I exhuast running through the fender wil pass MO's safety inspection.
What trans are you using? I bought a JW Ultra HP T400 rated at 2800HP.
|
Got a mockup stock block and turbo400 case at the shop. I talked to Mike about exhaust placement on Saturday. The 6 bars are going to be angled up, I'll have to ask about 2A-B.
Nice Trans! I currently have a fairly new TCI T-400 and 8" converter which will need to be replaced
Which converter did you go with?