Quote:
Originally Posted by GT182
Dale, I bought my interally regulated alternator at a parts store here. One near you should be able to give you suggestions as my parts guy did. Get one that replaces your old alternator but puts out more power. Save the fan and pulley off yours to reuse.
There's instructions here on PY on how to wire it so you can keep the external regulator on you firewall. To help..... You'll need jumpers on the external regs spades.... top and bottom spades jumpered, and 2 middle spades jumpered. I cut the wires inside my ext reg so there's no power flowing thru it. That's the reason for the jumper wires you'll solder on. Wiring plugs on to it as it did before.
|
Gary,
Good talking to you again. Thanks for the wiring tip. My old external regulator was going out when I started tearing the car down so it will be a great candidate for the modification.
Dale