Quote:
Originally Posted by Formulabruce
Grats Glad you found those brackets. I couldnt find the guy through ebay.
There are numbers stamped in them you may want to fill with some solder,brass..
The 3 piece front area of the rear frame is also attached to the rocker and actually completes the frame. rear to rocker, to subframe in front. Make sure that its not rusted and or welded to the rocker there correctly . That is the frame strength of the car.
Looking great. Keep up the good work!
PS. The trunk, the dark areas not dry yet are a bit pitted, I would consider coating it with some POR15 after etching it. any other paint would just trap it and make it rust through the spatter paint. Just my 2 cents...
|
The rockers are really nice and solid, othe than theass side that has the hole in the lower outer wheel house. (which actually made prseeure washing insid that rocker, really easy).
Yup, I was planning that same route with the POR15 on the pits.
Here's that link to the brackets:
http://www.ebay.com/itm/70-73-Camaro...9#ht_500wt_922