Quote:
Originally Posted by 70 Rick
Hi guys,
What are you using to paint the inside of front fenders, hood, etc.? I was considering the black DP primer, but I was advised to topcoat that with a urethane for extra protection. Then, I would have to add a dulling agent, which seems overly complicated. Is there anything in a one-step process? I am kinda curious about that Kirker hot rod black.
|
I have used PPG Omni line with a flattening agent with good results. Their top line stuff can not be flattened. You have to play around with the flattening agent to get it the right sheen of black.
Eastwood has lots of ready to spray blacks that you can buy to use in a spray gun.