Quote:
Originally Posted by RAIV-Z
Unfortunately I am serious, even with that much material removed from the rockers quite a few of them have marks which indicate they are still making contact with the springs/retainers.
The pushrods are Manley 25374-16 9.750 length, 3/8 diameter, .120 wall.
Take another look at the original balancer picture above. Those metal shavings were packed in behind the balancer bolt.
|
Take a look at the picture -- If those are Manley springs the end with the champher should be up - -unlike yours - that would contribute to your spring retainer issue - although prob will not fix it --and Id say goodby to those rockers --