As for the remaining bubbles: As painful as they are to look at (like a prom queen's pimple on prom night) they will go away. Refrain from using the needle unless you use the finest gauge insulin needle you can locate. Don't use a pin - it's way too blunt and way too big. It will stretch and tear the vinyl and leave a permanent defect you will see later.
Leaving the "pimples" alone is the best route. It just takes time. Sometimes as along as a week or two depending upon your ambient heat and humidity: the higher the heat and lower the humidity, the faster the bubbles will vent to the atmosphere through the vinyl.
It took almost two weeks for all the bubbles to disappear from my original decal installation. And all the ones that I ignored and didn't use a hypodermic needle on, were completely invisible at the end of the two weeks. The ones that I struggled to squeegy and pin prick, were the ones you could see.
|