[gavin]

63 lemans with 41000 miles on clock its a very staight car.I removed the 336 and replaced it with a late 400 with isky cam and ported 6x-4 heads.I hand drilled the 400 crank for the rope drive shaft useing a spacer/adapter for a jig.The bolt circle just fits on the crank (if any one wants the adapter drawing please let me know and I will try and find the drawing).The 336 flex plate is balanced to the same balance as the 400 flex plate.A 400 sump was then modified for the 63 starter as I wanted to keep the 336 together as its a real nice engine.I built tri-y headers for it and they are a real pain in the arse to fit.The gear box has had extra clutch plates and mods to shift harder.The engine bay is a bit piggy at the moment but I will clean it up when I change engines at a later date.I have found a 63 389 block that I want to stroke to 421 when I afford it (haha).Ill try and put some pictures up.