Quote:
Originally Posted by 65nss4spdGTO
X2
I started engraving the last three digits of the block serial number on the caps just to make sure they don't get interchanged.
Calvin Hill
Hill Performance
708-250-7420
|
I engrave "BE" on the #2 Cap. (Only need to mark one of them). The "E" points to the front of the engine.
You should know where the Rear Main Cap, the Thrust Main Cap, and the Front Main Cap go automatically. The only possible error would be mixing #2 and #3 and/or (putting them on backward. I have actually seen that happen).
Tom Vaught
__________________
"Engineers do stuff for reasons" Tom Vaught
Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward.
|