I have had the sub frame out of my car and have replaced everything you have done. please post pictures. If your sub frame is severely out of alignment this would throw everything off. A 3/4 inch passenger side drop I am not sure of that. What kind of bushings are you using- poly OEM or solid? Did the sub frame get tweaked at all during the resto and repaint. Did it fall of jack stands or braces? Also did you torque your control arms and new bushings with full weight on the car? Or was it on jack stands. If you used OEM rubber bushings this could be your problem. What about the rear suspension?
__________________
Lean, Mean and GREEN
|