I have some springs from a '74 Ventura and I think I will have them shortened 3" and use them. The spring rate should be good and not to stiff. Since I am using GM A body front disc setup I will use the 4.75 bolt pattern in the rear also. I tried putting ford wheels on the front but the center hole is too small compared to the Pontiac original wheels. My front suspension is in good condition but I have always wanted a straight axle Tempest since i saw one at Fremont Raceway when I was racing my '65 GTO in the later 60's.
Thanks to all for your help, I WILL get this done.
|