I need some help on the correct placement of the four studded head bolts used on 455HO - 7F6 heads. There are two long and two short studded bolts. I believe that one of the long bolts goes on the front drivers corners and is used for the battery ground. I think the two short ones go on the drivers side in the second and fourth bolt positions (there are five bolts on the drivers side) and are used to hold the heat shields. I cannot even fathom a guess on the remaining long studded bolt, but based on an hour searching the forums here think it might be used on the passenger side for the rear A/C bracket, but this is a WAG and I don't know what hole position if this guess is correct. I have searched here, in Rocky's and Jim Hand's books, and in the service manual to no avail.
I appreciate the help.
