Quote:
Originally Posted by JohnFromVentura
I have read most of the archives on front springs. My car has Kanter supplied springs (Eaton P/N MC1252). The car sits at 24" (ground to lip) ... way to low! I have talked with other forum members and a total of 3 cars with similar tires sit at 27" The springs they sent me are for a bland 66 Mustang and are over 2" shorter in free height with about 9% lower spring rates!
My question is:
Does anyone have access to a loose stock V8 front spring that they can measure the "free height" and coil wire size (if possible).
Any help appreciated ... John
Also, other spring vendors would be appreciated?
|
I did some research as I had the same issue. 1969 Camaro Z-28 no a/c works great for my '62 convertible with 428. The springs are shorter but have a higher spring rate. They were very easy to install due to the lower height.