I put on my Transamstripes.net roof stripe today. I didn't have my phone nor a camera so no pix. After compounding the roof, cleaning it with the supplied rapid tack product and laying out the placement it took me about 10 minutes to do a professional installation. First spraying the roof with the proper Rapid Tack product, I stripped the backing off the stripe, sprayed it with Rapid Tack, placed it on the roof, slid it into proper position and squeegeed it out.
After pulling the paper off I saw just what a GREAT job Greg did on these stripes. Compared to the PG deck lid stripe still on the car you can see the QUALITY. The Transam.net stripe is not as bright of a white as the PG. I am going to keep the PG stripe on the deck lid for this summer anyway so people can see the difference and see who makes the FINEST 70-72 strip kits out there.
This is the forth stripe kit that I have installed, 2 NOS GM, 1 PG and 1 Transamstripes.net. On the 2 GM kits I used the soapy water method with good results. On the PG set I used their recommended ( how can we make MORE $$$) GEL. In order to make the gel work I needed to thin it a bit, I thought that in the state it was supplied it was unusable. The Rapid Tack that Greg sells worked EXTREMLY WELL and I would recommend it. This stripe went on as well as a NOS stripe. When I pulled the mask of it I had only one small and I mean small bubble near the front of the stripe.
|