Quote:
Originally Posted by PunchT37
Summit 2801, Crower 60918 or Comp. XE262 cams should work much better with those low compress 6x heads. That`s if you don`t have those horrible 389/400 replacement pistons. Run a good 11 inch converter and possibly get rid of the 3.73`s and go with 3.23`s for a daily driver. The cam should go 1`st. Then tune, then worry about the converter and gears.
|
100% agree here, have the same engine and it's a great driver with no problems or idle troubles.
I will disagree that the extra eyebrow relief pistons being absolutely terrible for a low compression driver. Definitely not optimal and no good reason to go with them but if they are installed, no reason to tear the engine apart to replace them on a driver like this (I have a similar engine with them and no troubles there either).