You may also wish to use plastic or cardboard washers. Make sure the washers are larger than the bolt heads. This will reduce marring your finished paint as you are making adjustments, and you will be making adjustments. You may also consider using a spare set of bolts rather than your original bolts. This way, you will only need to install your original bolts once after the adjustments are completed. This will reduce scratching the finished plating/coatings from the bolts.
Also make sure your emblems are applied to the fenders (first rub out the immediate area aroung the emblems) if using the original factory method of securing the embems, prior to mounting the fenders to the inner fenders.
|