'67 Lemans. The left manifold is only about 1/8" away from the frame. I have about 1/2" of clearance on the right side. The 326 fit in there better, but it had the log manifolds. Would changing the motor mounts help that? I used the same ones that were on the 326 since they looked to be in good condition.
__________________
Sammy
1967 Lemans: 455 swap in progress (stock crank, stock rods, TRW slugs, mildly ported 6x heads, Stump Puller hyd roller, 1.5 PRW aluminum rollers, Comp hyd roller lifters, Performer RPM, q-jet, RA exhaust manifolds, 2 1/2" exhaust, ebay HEI), 200 4R, and some suspension stuff
|