Quote:
Originally Posted by 67'7F6'Bird
Thanks Guys.
I am going to Switch to the Ford Big Cap. Its the Cap-Adapt by MSD with the Phasable Rotor.
Still not sure why this needs to be Phased. Very basic setup. 6AL with Timing Computer.
But Looking at the Cap, its firing on the far edge corner of the CAP Pads.
Steve
|
Be sure to check the rotor to cap clearance with that deal, and keep an eye on it.
I've managed to phase pretty easy using a sharpie to mark the distributor, a "kit" can be made with an old cap by cutting a hole in it so you can see where the rotor is in regards to the cap, FWIW.