I have a smaller booster on the way. My original plan was to cut up the old M/T covers as they won't seal due to some neglect by the previous owner. I wanted to mount the coils in the top part of the "covers" to make them easy to remove. That way the good holley covers could be sold again at a later date.
This makes for clean wiring of the coils and I plan to use the factory grey connector. Again, ease of removal.
But it will have to wait for version 15.0 of the oil pump drive/ cam position sensor first.
Dave
__________________
'68 Bird Vert, 455 , 6x-8, 1.5 HS, HEI, PPR TC-02-HF, TH400, 2500 Hughes, 2.56 8.2 (getting swapped for second gen with shorter gears)
Fishing guide in the Washington state for Salmon, Steelhead and Sturgeon. Fish-On!
|