[REFORMULATED]

Detailed front brakes and replaced the inner fender rubber flaps. Fighting the staples loose and tight again without damaging the paint on the inner fender wells took some finesse. There was some faint markings on the rotors and I looked at a few posts here and other forums to attempt the correct markings and finish but have no idea if they are really correct. Once the wheels go on it's all moot anyway. Cleaned everything with a wire wheel on a drill, used 3M Metal prep and VHT grey primer and VHT cast blast on rotors and caliper. Have some new dust covers on order but in no hurry to replace.
Before



After