Earlier in this thread I had welded a 65-67 hood scoop onto a stock Grand Prix hood. I had planned on using this hood on the Aero Coupe. That hood currently resides on my "driver" Grand Prix. I just measured the carb height as compared to the top of the fender and came up with 2 3/4 to 3 inches. I then measured the peak of the hood scoop on the driver. It measured about 3 inches as compared to the fender. That makes this set up no good for the aero coupe. I've attached a picture of the hood on the G.P. I'll have to look at some glass hoods to see what catches my eye.
__________________
|