[gtofreek]

I did some math based off of Comp cams catalog spring specs and I figure you will need the #994 spring and have it installed anywhere from 1.625"-1.650". That should give you around 120-130 on the seat and 295-315 open, depending on rocker arm ratio and installed height. You need to see where your installed height is now, and decide what needs to be done to get it to 1.625"-1.650". There are several different things that can be done to change installed height, so it would help to know where you are now, to avoid speculation. I don't remember where the 094 heads setup at, or if I have even done a set. Done 092's, 093's, and such, I'm pretty sure the 094's will setup about the same.