Quote:
Originally Posted by gtofreek
I did some math based off of Comp cams catalog spring specs and I figure you will need the #994 spring and have it installed anywhere from 1.625"-1.650". That should give you around 120-130 on the seat and 295-315 open, depending on rocker arm ratio and installed height. You need to see where your installed height is now, and decide what needs to be done to get it to 1.625"-1.650". There are several different things that can be done to change installed height, so it would help to know where you are now, to avoid speculation. I don't remember where the 094 heads setup at, or if I have even done a set. Done 092's, 093's, and such, I'm pretty sure the 094's will setup about the same.
|
gtofreek and all people in this thread, I really appreciate your help. Those details you have provided are extremely helpful and have saved me time and minimal stress. Thanks very much.
So now my shopping list is almost complete.
I'm going to use the more aggressive VooDoo #10510701 camshaft and your recommended #994 springs. I can return the other cam that I had purchased from Summit. It's just shipping costs!
I'll have to take off the valve cover to measure the Installed Height but it will have to wait till the snow storm clears here in Maryland. We got hit by snow/sleet and freezing rain today and now it's too cold to deal with that tonight. I wish I had another garage for this project but it's outside till I get my 34 Ford Coupe finished and out of the way.