Quote:
Originally Posted by 165th
Here's a suggested method and how Norwood's spring clamps look on a fresh set of springs.
Dis-assemble the springs. Mark them so the left and right go back together properly.
Keep the rubber inserts under the spring clamps.
wirebrush to bare metal.
push new bushings in.
prime with zinc phosphate primer.
topcoat with OER High solids silver.
plastic spring spacers are available at Classic Industries. I haven't found them at PY or Ames.
Spring clamps are NORWOOD. They are perfect and accept the rubber insert perfect as well.
Good luck and have fun.
|
Please post the OER part number and the primer part number you have used. Would like to use the same you used..Looked for OER hi solids and all I found was aluminum color?? Appreciate your help..