Quote:
Originally Posted by Half-Inch Stud
Machine Shop Bill like that means a 1-piece oilpan gasket from Butler's sounds affordable.
|
I thought about one but seeing as how I'm well over on an already tight budget I'm going to use the complete gasket set I already have. I do however need to get another set of valve cover gaskets since I'm adding a valve cover spacer.
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/ [email protected], .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears
|