Quote:
Originally Posted by gtofreek
The Ti retainers are nice, but the steel retainers for Beehive springs are very small and much lighter than the steel retainer for a conventional spring. The steel retainer for a Beehive spring, I would say, is pretty close to the same weight as a Ti retainer for a conventional spring.
Also, I failed to mention that the Beehive spring setup was about 10 lbs. less on the seat, and IIRC, about 350 over the nose.
|
Was that a comp beehive spring?
__________________
Darby
74 Grandville 2Dr 455 c.i 4550#
2011 1.60 60 ft,
[email protected]@117.74
2017, 74 firebird -3600 lbs (all bests) 1.33 60 ft,
[email protected] [email protected]
M/T 275/60 ET SS Drag Radial
2024(Pontiac 505) 1.25 60 ft,
[email protected],
[email protected].... 275/60 Radial Pro's