Quote:
Originally Posted by Zyman
I include this link for illustrative purposes and not to advertise, endorse or comment in any way on the seller. But it looks like attaching PMD center caps should be achievable.
Regarding filament, you can run 285/35/18 rear and 255/40/18 front on the 18x9 rim. If you have a lot of cash and want to go with the forged, you could put 295/35/18 on the rears with a 18x10 rim without mini tubs or rubbing. Please note this is for early 2nd gens prior to the rear seat belt bulge.
http://www.ebay.com/itm/17x8-17x9-18...item4858dc27de |
Very nice
thanks for posting
__________________
www.fquick.com/Captainofiron
68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
|