Quote:
Originally Posted by SteveGB21
I was wondering if a rear disc brake setup off an '86 Firebird will fit my '70 Lemans? Also, would I still be able to keep the 14" wheels, or would I need to upgrade to 15" wheels? If that is the case, I might as well, since the tires are in need of replacing.
|
Im not sure if it will fit your rear end, when I was looking for the backing plates to use a 4th gen rear disk setup
if I remember right, the 4th gen rear setup is pretty close to the 1LE 3rd gen rear setup
I know for sure the 4th gen rear disk will not clear 14s, you need at least 15s (I think the rotor is around 11.8 or so in diameter)
Im pretty sure the the 3/4th gen rear axle flange pattern is the same essentially as the old 8.2 BOP axle flange
__________________
www.fquick.com/Captainofiron
68 Firebird 400, YC 400, Hbeam rods, ported 670 heads (2.11i, 1.77e valves), 1.65 RRs, Torker 2 intake, Nodular Crank, Eaton Limited Slip, Richmond 3.55 gears, M-20 M4
97 Trans Am WS6, LT1, M6, FLP LTs, Cutouts, Flowmaster catback, Jet Airfoil, K&N air filter, MSD Opti and Coil
14 Fiat 500e 83kW motor, 24kWh lithium ion battery, +2 sized summer tires
|