Quote:
Originally Posted by Craig Hendrickson
OK, with the above correction, I have one more thing to say. A few years ago for my personal use I restored a 1979 T/A W72 (400CID, 8.2:1 CR, 6X-4 heads) with B-W Super T10 and 3.23:1 rear gear. Because I wanted a driver, I installed a Summit 2801 cam (like a Pontiac 068). In retrospect, it was not enough cam. One barely knew there was a cam in it. A few years later, I sold it on ePay.
This statement is completely wrong.
|
Hello Craig my name is Brian I know you would be the best to pose this question to.Looking to cam up my 68Gto H.O. I think when the rebuild happened a few years back the owner put in a 066 or 067 cam.Looking for something I don't have to swap out the springs on,I have always used the 068 in most of my Pontiacs great cam-can you recommend something a tad more aggressive.MY combo is 68 400YZ 16 heads automatic trans 355 posi electronic ign. h/o exhaust manifolds. Thanks Craig for all your input over the years. 10.5 stock compression. Brian