I had a couple of forum members asking for updates. It's been slow going, I keep hurting myself. I was dealing with an elbow injury and then hurt my back around thanksgiving. Only got a few things done.
While recovering I found a picture of my first car. The photo was taken around 1973. I had the car repainted 1968 verdoro green. The photo is faded and does not represent the true color of the car. A GTO would have been my first choice, but being 18 and in college, a GTO was not a possibility.
I installed the inside lock for the hood. This is something I should had ordered and installed while the car was apart. It was very difficult to run the cable. This system simply locks the hood so the release under the bumper won't work. It is not a inside hood release.
My aftermarket core support needed to be cut to allow the latch to be inserted. I still need to clean up and paint where I cut the core support.
Cleaned up on of the fittings on the steam line.
Hidden Headlights.
Starting condition
Work in progress
Here is a cleaned up schematic of the vacuum lines on the hidden headlights. This was cleaned up from the 69 assembly manual which was very hard to read.
http://peripheraltech.com/gto/hidden.jpg High resolution (For printing)
That's about all I've done.