[AROWHED]

I bought a new a PS pump for a 95 Chevy 1/2 ton pickup with a 350, it already has the serpentine pulley attached, and if not you can order it seperately. The serp pulley will not work on the older pumps. HOWEVER, you will need to swap the pump's pressure output fitting with the one from your old style pump, OR change the fitting on that end of your high pressure hose..because of different styles. Or just have a new hose made at NAPA, etc. Old is inverted flare, new is bubble flare.

One other thing, my PS brackets are from a 73 455, and bolting up the 95 pump was a snap...really just about any year Saginaw pump will be, because (I believe) the bolt hole bosses are all in the same locations. So, you *should* be able to use your 68 brackets, but I wouldn't, since Jimmo's PS pump spacer is specifically designed for the much easier to adjust 70's style brackets. Since a period correct look is obviously out the window with a serp belt, I suggest losing the 60's brackets.