J.C., If you mean a porters version like Edelbrock's pro port, no. I did cast the heads without a combustion chamber though, and the port has plenty of material around it for porting. So I guess it all depends on what one would consider a porter's version. I do know for sure that the head responds real well to porting. Even as good as it is as cast it wants more LOL. I can and will provide the bare castings without the seats and guides installed if someone wants them that way.
Mike, Thanks for the Kudo's!!!
You can use my intake on stock heads. You just need to build a tall deck block with your heads and my intake LOL. I raised the port a little over an inch from stock on my heads, and I don't want to make the intake flange 1 1/2" thick. That would be the only way someone could use my intake on a stock deck height block. They would need to mill an inch off each side to make it work LOL. I guess if someone really wanted to use my intake on a stock head. They could get real ambitious like yourself, and cut the flange off. Shorten the runners and weld it back together, but that would take wild men like you and Tom S. to do that LOL.
Don Johnston
DCI MOTORSPORTS INC.
330-850-5050 shop
330-628-3354 cell
Designer of the DCI Tiger Heads and the NEW DCI Ram Air 5 Heads !!!!!
|