All the ones I have or seen, the the bracket that mounts over the valve cover that holds the black rubber bellow on 67's is a 2 piece design, the 68 & 69's have a one piece bracket. Otherwise the components are the same through the years. All the pieces are the same, except for the bracket that holds the servo to the wheel well, full size cars have a flat small bracket, and 67-69 A-body & 69-70 G-body uses a taller pedestal bracket. The carb linkage bracket is also different on a fullsize, uses a rod instead of a cable and the speedo cables are longer. The a-body and g-body setups are identical.
|