Just an update to say.. not much of an update! Got the dash wiring pretty much done, just need to tuck up some loose wires. Half of the interior is installed, just need to get a set of seatbelts before I go too much further.
Trying to get the endura fitted, and it looks pretty good except for the gap at the bottom sticks out about 1/4" so I hope it is a somewhat usual adjustment to have to elongate the bumper bracket holes. Thinking maybe my gaps are a bit tighter than factory so there is not enough adjustment left on the slots? That's how I justify doing it, anyway.
Still trying to figure out how I'm going to get the filler neck on the gas tank bent into the proper position. I think I am going to try a brass punch and a BFH in the area by where the neck goes into the tank. If I can get this area in a little bit it should swing the neck over a little bit.
__________________
-Jeremy
1968 GTO 4-spd convertible, console, factory gauges, hidden headlights, 3.90:1 posi, AM/FM radio.
1962 Catalina convertible, Starlight black w maroon interior & white top.
|