Lower dipstick tube and main studs
Just wondering what other people are doing that have ran into this. I added main studs and align bore over the winter. The lower tube bolts to the main cap but the height of the stud is in the way, the most obvious solution would be to rebend the bracket some and just put a few stacked washers between the bracket and main cap probably about 3/16 ", or replace one of the studs with a threaded hole and bolt it to that. Or modify the bracket and put it under the nut on the main stud itself? Really don't know if I want to do the last one. I'm not running a windage tray either.
__________________
Illinois Outlaw Gassers
6.27@107
9.97@131
|