Solid cam,first one that comes to my mind is the Crower #60311 for that sorta combo.
Could also go Comp 290b on a 112° LSA too.
Like before,one slightly smaller,and one slightly bigger.
Wider LSA will be nitrous friendly too.
Use Crower coolface solid lifters,pop extra for Nitriding the cam core too.
And again,if those are the OE valve springs that came on the Eheads,I repeat lose those pronto,I bet $$$ if you check them on RIMAC they wont hold up to muster.
And I'd run a better oil with a flat tappet set-up.
Dont get me wrong,I used to love Castrol GTX too,but IMHO Castrol really has'nt kept up on this segment of their buying public and recent history as far as modern oils & ZDDP and such.
Valvoline VR-1,Brad Penn,Torco,Gibbs,et-al all have flat tappet specific oils.
FWIW
Bret P.
__________________
This space for rent... 
In the meantime,check out the cars HERE.
|