Quote:
Originally Posted by RicksGTO
I used a glob of silicone on the studs/holes and then pushed a small piece of 1/8" model engine fuel line onto the back of each stud to keep them tight against the tail panel. Once the silicone sets up with the tubing they shouldn't ever move or get loose.
|
Water proof's the holes too. 
__________________
Some guys they just give up living
And start dying little by little, piece by piece,
Some guys come home from work and wash up,
And go racin' in the street.
Bruce Springsteen - Racing In The Street - 1978
|