Those rings will be a good pick, but after you file them be sure to break the top end and bottom end of the rings with a soap stone or such,or they will little by little cut open the ring grove as they rotate around the piston and by by goes your compression!
Also break I the end of the ring that rides on the cylinder wall as these cut ends are many times the sourse of scratches in the walls.
Like wise you should check the ring grove clearance in those pistons if they are used, more than .004" of ring to groove clearance is a issue!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs!
And he was not talking about 1/8 or 1/4 mile ETs!
1) 1940s 100% silver 4 cup tea server set.
Two dry rotted 14 x 10 Micky Thompson slicks.
1) un-mailed in gift coupon from a 1972 box of corn flakes.
Two pairs of brown leather flip flops, never seen more then 2 mph.
Education is what your left with once you forget things!
|