[gtofreek]

Also, don't get the Moly paste on the sides of the lifters. Only get it on the cam lobes and lifter face. If it is on the sides of the lifters, it can prevent them from spinning good during initial break-in, and wipe them, and the cam out.

I use ATF on toilet paper or paper towels to clean the cylinders out, after I wipe them out with lacquer thinner. Lacquer thinner is pretty harsh though, but the black, nitrile gloves hold up pretty well to it. You'll be amazed at how much dirt you will pull out of the cylinders with the ATF after you clean them with other cleaners.