[gtofreek]

Originally Posted by geeteeohguy

Nix on the Lubriplate inside any engine for me. Have seen several engines wiped out that were assembled with the stuff and then the owner got sidetracked and the engines sat....and the lubriplate (white lith grease) set up into cement. I wouldn't even use the stuff on window regulators...it locks those up, too.

X2! I tore down a Pontiac 400 that had 60,000 miles on it, and the rear main bearing groove was filled with dried up white grease. The entire groove! None of it washed out and mixed with the oil.

We use Synergyn assembly lube. Even on roller cam engines! Stays on the bearings much better than oil.