Quote:
Originally Posted by 1969GTO
A special request for a Stock fitting carpet should not be needed,it's a stock factory fit.
A carpet orderd from the book is expected to fit.
As for as installing correctly,I laid my carpet in according to the vinal pad on the drivers side foot area flat, made the holes for the belts and consol and shifter a lot of work to find the carpet was cut short.
Now what? go to all that trouble again? have the car sit for how long battling the vender with no carpet in it?
Just warning others.
A couple of problems compaired to thousands made? I bet that there are more but don't know about this tread or are just living with it as I have.
|
Agree 100%
When I laid mine in the car, I made sure everything lined up and fit,
The down side was, (because it was short) that I either had to expose the front floor pan,
Or
Expose the backseat pan below the backseat cushion. There wasn't any other option.
I attempted to split the difference but the result would've been the carpet fitting even worse,
And it would've exposed both the front and rear floorpans (a smaller amount than either but still exposed and the carpet would've sagged down at the rear seat).
As far as having acc look at the carpet, the carpet was a 1pc set so there isn't a front and a back section like a 2pc.