[Nicks67GTO]

I got the 06' GTO seats in today. I'm extremely happy I did this. My maiden voyage with them was fantastic. Im honestly pissed at myself that I spent the $ trying to restore the stock seats with the Legendary Rallye setup at this point. I'm trying to decide if i'm going to sell them. I might let someone else have them at a good price instead of storing them for 20 years....

Anyhow the 06' GTO seats are awesome. They sit great, have 8 way power mobility and are about the same weight as stock seats. Anyone that says they "sit up too high" must have been 6'9" and had stock buckets with broken springs in the lower seat before. I'm 6'1" + a touch and I sit in them great. They are a touch lower than my newly stuffed stockers.

I did reuse my 3" seat relocation brackets I made for the stock buckets. I figured it would allow me to run the seats forward to fit me correctly and hide the bracketry I made. I used a couple pieces of 1/8" x 1.5" wide x 3.25" long steel for the front. I used 3/16" x 1.5" angle iron for the rears. I shaved the rear angle iron down to 1" so it would clear the floor and give max headroom. Then its 12v on the red wire and a ground on the black. The install is pretty easy and straight forward. I'm going to make a thread detailing what is needed to get it done and ill link it here. If you have tools and and know what to do it's probably like a 4-5 hour job.

Well here's a few pics from the day....