Quote:
Originally Posted by SupergasDil
IF you are looking for big flow on the high ports why not go to Kauffman. I have been talking with Jeff over the past few days about upping my game. My current High Ports which were done by Kauffman about 7 years ago flowed 403 cfm. Now we're going to do the 430 cfm port job along with some other changes to the top of the engine. Going from 1,300hp to roughly 1,700hp. If you want to move air, Jeff's definitely got it dialed in.
|
1300 to 1700 is a big step up in motor and chassis.
Good luck in 2015!